Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Chery QQme introduce

From the overall appearance design, the Chery QQme is very similar to the Volkswagen Beetle, especially in the front design curve. In order to provide good headroom in the rear, the curvature of the rear is slightly higher compared to the front. The Chery QQme adopts a two door design, and when the front doors are large, it feels very heavy but also a bit laborious. The new car's front headlights and rear tail lights both adopt an integrated LED light group design, which improves driving safety. The round shape is very cute