tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Ruiqi M5 introduce

The Ruiqi M5 belongs to Chery's high-end brand Ruiqi. The Ruiqi brand has foresight, courage, and success as its genes, and the Ruiqi M5 also adheres to this characteristic. Chery's microcars are almost always displayed with smiling faces, and the Ruiqi M5 is no exception. From the front, it looks like a cartoon smiling face, with two simple shaped water droplet shaped headlights resembling a pair of simple eyes; The radiator of the water tank is the smiling big mouth of M5, not as domineering and fierce as other models, only playful