The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
BAIC is the oldest off-road vehicle manufacturer in China. In the past, its name was always associated with the 212 off-road vehicle, but now it is not only competing in the low-end off-road vehicle market, The Land Cruiser is a powerful tool for its entry into the mid to high end SUV market. The prototype of the Land Cruiser is Toyota Land Cruiser. The Land Cruiser's 2700 and 3400 have a considerable number of vehicles in China, including double wishbone suspension, spiral spring, independent front suspension with lateral stabilizer bar and four-bar linkage, spiral spring, and rear suspension with lateral stabilizer and thrust bar
Copyright © 2021.Company name All rights reserved.