Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

New City Hunter introduce

The BJ2020VB New City Hunter is a light off-road vehicle developed by Beijing Jeep Automobile Co., Ltd. with advanced technology from Daimler Chrysler and combined with the actual situation in China. It is equipped with a 498 electronic fuel injection engine SIEMENS electronic fuel injection control system. Five speed gearbox, fully ensuring the power performance of the vehicle; The front disc and rear drum braking system increases the reliability of braking; Power steering increases driving comfort The BJ2020VB is equipped with a 2.5-liter four cylinder multi-point electronic injection engine. The advanced multi-point fuel injection system is redesigned and calibrated based on various factors such as Chinese roads, climate, and fuel. It ensures that the engine operates at its optimal working state at all times and outputs strong power to the transmission system; At the same time, it can be equipped with a three-way catalytic device, combined with closed-loop control technology, to meet the emission requirements of European Regulation I; Equipped with a five speed manual transmission, it is more fuel-efficient when driving at high speeds compared to traditional four speed transmissions; Equipped with 4X4 transfer gears, fully ensuring the vehicle's off-road capabilities