The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Volvo C70 is a three fold hardtop four seater convertible sports car that can fully meet the multiple needs of drivers. It not only allows consumers who pursue emotional experiences to enjoy a new romantic lifestyle, but also allows rational consumers who value practical needs to feel the simplicity and freshness of Scandinavia. From exterior to interior, from design to craftsmanship, from safety protection to everywhere reflecting a humanized attitude towards life, The all-new Volvo C70 perfectly demonstrates Volvo's humanistic care for drivers and passengers
Copyright © 2021.Company name All rights reserved.