Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

ix35 introduce

The Beijing Hyundai ix35 is a mass-produced model based on the evolution of concept cars. In terms of appearance, the ix35 completely breaks away from modern SUV models such as the Tucson. The body extensively uses sharp lines, and the waistline is also a design highlight emphasized by Beijing Hyundai. At the same time, the configuration of the Beijing Hyundai IX35 is also very rich, including safety airbags, automatic control headlights, panoramic sunroof, aluminum alloy wheels, and barrel style instrument panel, all of which showcase a noble atmosphere