The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Sichuan Hyundai Automobile Co., Ltd. is a joint venture established by Nanjun Automobile, a backbone enterprise in the Chinese commercial vehicle industry, and Hyundai, the world's fifth largest automobile manufacturer. The two major automobile groups formed a joint venture of 1.8 billion yuan, mainly engaged in the production, sales, service, and research and development of commercial vehicles, engines, and their accessories. The joint venture will invest a total of 10 billion yuan, Establish a world-class commercial vehicle production base in Ziyang in three phases. After the base is fully completed, the annual production of commercial vehicles can reach 700000 units, with an output value exceeding 100 billion yuan and providing 50000 employment opportunities
Copyright © 2021.Company name All rights reserved.