ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)
1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket
The Beijing Mercedes-Benz GLK300 is equipped with Mercedes-Benz's 4Matic all-wheel-drive system, which means that all four wheels of the GLK will always have power transferred to the wheels from the engine via the transmission. This means that all four wheels of the GLK will always have power from the engine via the transmission and the splitter to the wheels. The GLK is not equipped with front or rear differential locks. The GLK is not equipped with front or rear differential locks. When one of the wheels slips, the 4Matic system uses the limited-slip function integrated into the ESP to lock one wheel by using the brakes to transfer power to the other wheel, thus realizing a function similar to differential lock.
Copyright © 2021.Company name All rights reserved.