tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

New Sail SRV introduce

The minimum ground clearance of the SRV is 165mm, which is almost the same as that of a city SUV. I drove it to go fishing and had great confidence when walking on rough roads. The car space was not very spacious, but it was also sufficient (our body size was relatively small). Although the size of the car was small, its load-bearing capacity was absolutely excellent! There aren't many A-class cars that can beat it now, and it's like a station wagon no matter what. But station wagon doesn't seem to be very popular in China, so let's not talk too much about the above picture! The shooting conditions are a bit poor, I'll just make do with it