engine computer introduce

The car engine computer is the core part of electronic controlled cars nowadays, and its functions can be simply put as two: 1. receiving signals from various sensors and calculating corresponding data; 2. Control the fuel injection, ignition, and idle intake of the car engine based on the calculated data to ensure the normal operation of the engine and minimize engine emission pollution. 3. If the engine computer board is damaged, the following situations may occur: 1. The engine malfunction light is on, but then catches fire and the vehicle shakes; 2. The car is difficult to start, with no ignition or fuel injection, and internal program disorder. There are many symptoms of the engine computer board being broken, with minor ones being the engine malfunction light coming on and then catching fire. The vehicle shakes, making it difficult to start. In severe cases, the vehicle may be unable to start, with no ignition or fuel injection, and internal program disorder)

Installation method for engine computer

1. Use a T20 screwdriver to disassemble the screen and a 10mm hexagonal socket to disassemble the brake light. 2. Use a plastic pry bar to disassemble the panel, pry the pry bar firmly to loosen it, and unscrew the four screws of the host using t20. 3. Use t20 to unscrew the four screws around the host and pull them out, connecting three wires to the back. 4. Use a 10mm socket to disassemble three reversing lights, and the power of the rear camera is also connected to the black negative wire and the white green positive wire of this light

FAW Jiaxing Happiness Messenger introduce

FAW Jiaxing Happiness Messenger is a small family car produced by FAW Motor Group. The prototype of Happiness Messenger is a move from Daihatsu, Japan. Tianqi has made a series of improvements to it according to domestic usage conditions and officially launched it on the market in November 2001. It was jointly developed by Tianjin Huali Automobile Co., Ltd., Tianjin Automotive Research Institute, and China Automotive Technology Research Center. All molds, fixtures, and gauges for the entire vehicle are manufactured in Taiwan, Key components are supplied by Japan and Taiwan, with a localization rate of 80%