tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

FAW Jiaxing Happiness Messenger introduce

FAW Jiaxing Happiness Messenger is a small family car produced by FAW Motor Group. The prototype of Happiness Messenger is a move from Daihatsu, Japan. Tianqi has made a series of improvements to it according to domestic usage conditions and officially launched it on the market in November 2001. It was jointly developed by Tianjin Huali Automobile Co., Ltd., Tianjin Automotive Research Institute, and China Automotive Technology Research Center. All molds, fixtures, and gauges for the entire vehicle are manufactured in Taiwan, Key components are supplied by Japan and Taiwan, with a localization rate of 80%