front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Mercedes Benz B-Class introduce

This Mercedes Benz B-Class is currently the cheapest entry-level car with the Mercedes Benz logo, and it is also the cheapest model in China that is equipped with an active parking assist system. In addition, there is a unique panoramic sunroof structure. Unlike the Mercedes Benz C200, the Mercedes Benz B200 uses a specially designed 2.0L inline four cylinder engine installed in the car with a slight tilt, which not only complements the special chassis structure of the B200, but also, And it can keep the cockpit as far away from the frontal collision area as possible. It is equipped with an AUTO TRONIC continuously variable transmission, also known as a CVT transmission. After being recalibrated by Mercedes Benz, it can output a maximum power of 100 kW and a torque of 185 Nm. In actual testing, the initial response of the electronic throttle is still a bit sluggish, but it is most frequently used in the area of 2500 to 3500 rpm, Having sufficient low torque performance for daily use. After shifting the gear to manual mode, the CVT gearbox with a 7-speed setting immediately enters sport mode, and the switching method is also more convenient. Although it enters sport mode, it is obvious that this car is not born for sport, so the expected value should not be too high, and the sport mode cannot have the expected push back feeling As a compact sports wagon, the Mercedes Benz B-Class has a stylish and dynamic appearance. The large three pointed star emblem on the front face is embedded in the center of the trapezoidal grille, revealing its identity. The lines on the engine compartment cover contract inward, making the headlights on both sides more sharp. The combination of the bumper and front fog lights gives the Mercedes Benz B-Class a powerful appearance