The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)
The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan
This Mercedes Benz B-Class is currently the cheapest entry-level car with the Mercedes Benz logo, and it is also the cheapest model in China that is equipped with an active parking assist system. In addition, there is a unique panoramic sunroof structure. Unlike the Mercedes Benz C200, the Mercedes Benz B200 uses a specially designed 2.0L inline four cylinder engine installed in the car with a slight tilt, which not only complements the special chassis structure of the B200, but also, And it can keep the cockpit as far away from the frontal collision area as possible. It is equipped with an AUTO TRONIC continuously variable transmission, also known as a CVT transmission. After being recalibrated by Mercedes Benz, it can output a maximum power of 100 kW and a torque of 185 Nm. In actual testing, the initial response of the electronic throttle is still a bit sluggish, but it is most frequently used in the area of 2500 to 3500 rpm, Having sufficient low torque performance for daily use. After shifting the gear to manual mode, the CVT gearbox with a 7-speed setting immediately enters sport mode, and the switching method is also more convenient. Although it enters sport mode, it is obvious that this car is not born for sport, so the expected value should not be too high, and the sport mode cannot have the expected push back feeling As a compact sports wagon, the Mercedes Benz B-Class has a stylish and dynamic appearance. The large three pointed star emblem on the front face is embedded in the center of the trapezoidal grille, revealing its identity. The lines on the engine compartment cover contract inward, making the headlights on both sides more sharp. The combination of the bumper and front fog lights gives the Mercedes Benz B-Class a powerful appearance
Copyright © 2021.Company name All rights reserved.