Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Kuncheng pickup truck is a car jointly developed by FAW and General Motors. The SUV style design gives the pickup truck a bit of a fashionable atmosphere. The comfortable driving experience and practical style design are the design highlights of the Kuncheng pickup truck. The car has an exterior size of 5070 * 1740 * 1720mm; The overall driving and passenger space is 1.2 times that of a pickup truck of the same class. The size of the cargo rail is 1380 * 1465 * 480mm, and the height of the cargo rail is 100mm higher than that of a traditional pickup truck, which has an additional 20% capacity. It is equipped with a 2.2L gasoline engine and a 2.4L diesel engine, and a 5-speed manual transmission, which has good fuel efficiency
Copyright © 2021.Company name All rights reserved.