Front turn signal introduce

Turn signal is an important indicator light that is activated when a motor vehicle turns to remind the front, rear, left, right, and pedestrians to pay attention. The turn signal tube uses xenon gas tubes, a microcontroller control circuit, and the left and right rotate continuously to flash. The turn signal uses a flasher to achieve light flashing. It can be mainly divided into three types: wire blocking, capacitive, and electronic. Among them, wire blocking can be further divided into hot wire (electric heating) and wing type (bouncing), Electronic flashers can be divided into hybrid (with contact relays and electronic components) and fully electronic (without relays). For example, pop-up flashers use the principle of electric current thermal effect, which uses thermal expansion and contraction as power to cause sudden changes in the spring plate to connect and disconnect the contacts, achieving flashing lights. Turn signals are the most important device that represents the dynamic information of the car, installed in front and behind the body, and can be turned on when the car turns, providing safety assurance for driving, For your and others' safety, please use turn signals according to regulations, so that people can know the direction of the car in advance and make correct judgments)

Installation of front turn signals/rear turn signals/LED daytime running lights/side marker lights/front and rear position lights

Tool preparation: 1. First, we need to prepare the tools required for the entire process of installing car turn signals, including a screwdriver and a wire hook. Then, we need to prepare the car turn signals that need to be installed. 2. Turn on the double flash. As shown in the figure, open the car's key door, and press the switch button of the double flash by hand. This way, the car's double flash will open. Observe the position of the turn signal wire harness. Now we can take out the iron hook, You can make this iron hook yourself, just put it on a wire head. It's quite simple because we have a dual flash, so we can observe the position of the turn signal harness through the hole. 3. Hook out the turn signal. As shown in the figure, after we find the position of the turn signal harness, we use the small iron hook made to hook the harness, and then hook out the turn signal. Be careful to hook it slowly, Avoid disconnecting the wiring harness, and also be careful not to scratch the surface of the car, which may affect its appearance. For the first time installing a car turn signal, as shown in the figure, take out the car turn signal that needs to be installed. Let's take a closer look. There are two small snap holes on the turn signal lampshade that can be directly attached to the turn signal. Please find a good position and gently attach the turn signal to the lampshade. 4. Installation of the car turn signal. As shown in the figure, Gently clip the pre installed car turn signal light onto the card hole on the body of the car, making sure the position of the card is accurate. There is a small iron plate on one side of the turn signal light, so we need to install the plastic side first, and then gently fasten the side with the small iron plate!

Mercedes-Benz E-Class introduce

Mercedes Benz E-Class, an automotive brand. Beijing Mercedes Benz, with numerous innovative technologies, adopts a brand new six cylinder engine and a 7-speed automatic transmission. It has become the standard for high-end executive sedans in terms of vehicle safety, comfort, and handling. It achieves a good balance in size, performance, and price. The appearance is atmospheric and stable, and driving and riding are very comfortable, suitable for both business and household use. It has low wind noise, good sealing, and good sound insulation, The acceleration is sharp, the braking is strong, the sound effect is good, the air conditioning is heated and cooled quickly, and the luggage compartment is large. The 2014 Mercedes Benz E has undergone many upgrades and improvements, including its monocular front headlights. This headlight does not follow the four eye headlight design, but uses LED lights and dual xenon headlights. The new intake grille has also been adjusted to accommodate the new headlights, and the 2014 Mercedes Benz E also adopts a brand new engine hood The concise and smooth appearance, luxurious and spacious body, and comprehensive and thoughtful system design of the new Mercedes Benz E-Class will definitely satisfy consumers. The equipment of the new Mercedes Benz E-Class includes a CDI diesel engine, which can provide amazing 349 horsepower and -391, lb ft torque power. All Mercedes Benz E-Class equipment includes an electronic controlled automatic transmission system with 5 speeds, and is equipped with a driver adjustable transmission logic circuit and a selectable manual transmission controller, 6-speed manual transmission, standard window briefcase and state-of-the-art electronic assistance system. Standard equipment also includes anti-theft alarm system, full leather seats, TeleAid automatic call system for emergency and quick contact, dual air controller, front seats adjustable in 10 directions, electric canopy, collapsible steering column, electric windows and door locks, route controller, AM/FM stereo tape, and 16 inch alloy wheels