Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Modern h100 introduce

On August 16, 1993, Wuhan Wantong Automobile Co., Ltd., jointly invested by five shareholders including Dongfeng Motor Corporation (including Dongfeng Wuhan Light Automobile Company), Hyundai Motor Corporation of South Korea, Wuhan Economic and Technological Development Zone Development Corporation, and Wuhan Automobile Industry Company, was officially established with a registered capital of 28 million US dollars. Against this backdrop, This Wuhan Wantong Automobile Co., Ltd. introduced Hyundai's most advanced H100 van as its product