Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
On August 16, 1993, Wuhan Wantong Automobile Co., Ltd., jointly invested by five shareholders including Dongfeng Motor Corporation (including Dongfeng Wuhan Light Automobile Company), Hyundai Motor Corporation of South Korea, Wuhan Economic and Technological Development Zone Development Corporation, and Wuhan Automobile Industry Company, was officially established with a registered capital of 28 million US dollars. Against this backdrop, This Wuhan Wantong Automobile Co., Ltd. introduced Hyundai's most advanced H100 van as its product
Copyright © 2021.Company name All rights reserved.