The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Announcement model: NPR66L Type: Truck Drive form: 4X2 Engine: Isuzu 4HF1 Origin: Japan Tonnage level: Light truck Engine: Isuzu 4HF1 Engine commonly known as Isuzu 4HF1 Number of cylinders: 4 Fuel type: Diesel Cylinder arrangement: inline displacement: 4.33L Emission standard: National III/European III Maximum output power: 88kw Maximum horsepower: 120 horsepower Torque: 285N · m Maximum torque speed: 1800RPM Rated speed: 3200R PM cargo box parameters cargo box form: fence type cab parameters cab: flat top passenger capacity: 2 people
Copyright © 2021.Company name All rights reserved.