Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

FAW Toyota Yize IZOA introduce

The Yize IZOA, as the first model under FAW Toyota based on the TNGA architecture, does not continue the fixed mode of small cars with small displacement, but is equipped with a "large displacement" TNGA 2.0L naturally aspirated engine. The TNGA 2.0L engine has entered the domestic stage, and through technologies such as improving thermal efficiency, reducing friction resistance, and controlling intake and exhaust valves, its power performance is improved by 15% -20% compared to traditional 2.0L engines, The fuel economy has improved by 25%. The Yize IZOA transmission system is matched with a 6MT or CVT gearbox. In terms of appearance, the Yize IZOA will draw inspiration from the design elements of the Fengchao Way concept car. The front grille is equipped with a horizontal air intake grille and two angled headlights on both sides, and the lower grille adopts an inverted trapezoidal shape with a black mesh design inside. The traditional straight waistline is diluted, and the exaggerated front and rear wheel arches are connected by a flowing arc, The large area anti friction protection panel is full of wildness. The second row doors of the new car are equipped with hidden door handles, similar to the Honda XR-V, and the unique "boomerang" LED light group at the rear is impressive. The Yize IZOA continues the design style of the American version C-HR, leaning towards the driver's side as a whole, equipped with a three spoke multifunctional steering wheel, integrated with Bluetooth phone, multimedia playback and other control keys. The instrument panel adopts a double barrel shape, The center is equipped with a driving computer. The top of the center console is equipped with an 8-inch floating display screen, supporting HMI human-machine interaction system, and the bottom is the air conditioning area control key