The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
With the emergence of the young consumer group, the sales and attention of small cars have also increased rapidly. Emerging models such as CS35PLUS and Jixiang Binyue have also emerged one after another, hoping to seize the latent market share of this segmented environmental trend. However, when it comes to small SUVs, one must mention Baojun, which has already shaken the entire SUV industry with the Baojun 510 and even shook the position of Haval H6 at one point. Now that the car market is cold, the cost needs have changed, The sales of the Baojun 510 plummeted year-on-year, with a monthly sales of 13785 units in August, which is not as high as the Audi Q5L
Copyright © 2021.Company name All rights reserved.