tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Baojun RS-3 introduce

With the emergence of the young consumer group, the sales and attention of small cars have also increased rapidly. Emerging models such as CS35PLUS and Jixiang Binyue have also emerged one after another, hoping to seize the latent market share of this segmented environmental trend. However, when it comes to small SUVs, one must mention Baojun, which has already shaken the entire SUV industry with the Baojun 510 and even shook the position of Haval H6 at one point. Now that the car market is cold, the cost needs have changed, The sales of the Baojun 510 plummeted year-on-year, with a monthly sales of 13785 units in August, which is not as high as the Audi Q5L