electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Baojun 330 introduce

The Baojun 330 is a brand new three box small car under the Baojun brand, which will be equipped with a 1.5-liter engine. In terms of design, it can be seen from the application drawings that the new car continues the Baojun family's front face design, with the brand logo embedded in the center of the shield shaped air intake connected to both sides of the headlights, and the design below the bumper is very layered. In terms of tail design, the Baojun 330 incorporates multiple horizontal line designs, with a clear sense of hierarchy, At the same time, it can be seen that the car is equipped with a reverse radar. In addition, the new car will also offer various wheel styles to choose from. In terms of body size, the length, width, and height of the Baojun 330 are 4300/1748/1500 millimeters respectively, and the wheelbase is 2520 millimeters