Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Baojun 330 introduce

The Baojun 330 is a brand new three box small car under the Baojun brand, which will be equipped with a 1.5-liter engine. In terms of design, it can be seen from the application drawings that the new car continues the Baojun family's front face design, with the brand logo embedded in the center of the shield shaped air intake connected to both sides of the headlights, and the design below the bumper is very layered. In terms of tail design, the Baojun 330 incorporates multiple horizontal line designs, with a clear sense of hierarchy, At the same time, it can be seen that the car is equipped with a reverse radar. In addition, the new car will also offer various wheel styles to choose from. In terms of body size, the length, width, and height of the Baojun 330 are 4300/1748/1500 millimeters respectively, and the wheelbase is 2520 millimeters