LUK introduce

The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)

Installation method of clutch three piece set

This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type

Chery Tiggo 5 introduce

The Tiggo 5 is a sporty SUV full of vitality. Originating from Italy, the exterior design embodies quality and a sense of technology, and is endowed with distinct male characteristics in design. Its body reaches the C-NCAP five-star safety level, achieving the best four-star level of domestic SUVs in Europe. The body torsional stiffness is 23k, and the lightweight coefficient reaches the leading 4.69 in China. The one-time manufacturing compliance rate of the body is 99.7%, surpassing that of joint venture brands. Chery named it the Tiggo 5 On November 28, 2013, it was officially launched in Shanghai and launched the Chery Grateful Season Celebration. It was endorsed by Li Yapeng. The new car is equipped with a 2.0L DVVT engine and offers a 5MT or CVT transmission for pairing, with a price range of 93900 to 150900 yuan. It is a masterpiece of Chery's return to the brand