Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Chery Tiggo 5 introduce

The Tiggo 5 is a sporty SUV full of vitality. Originating from Italy, the exterior design embodies quality and a sense of technology, and is endowed with distinct male characteristics in design. Its body reaches the C-NCAP five-star safety level, achieving the best four-star level of domestic SUVs in Europe. The body torsional stiffness is 23k, and the lightweight coefficient reaches the leading 4.69 in China. The one-time manufacturing compliance rate of the body is 99.7%, surpassing that of joint venture brands. Chery named it the Tiggo 5 On November 28, 2013, it was officially launched in Shanghai and launched the Chery Grateful Season Celebration. It was endorsed by Li Yapeng. The new car is equipped with a 2.0L DVVT engine and offers a 5MT or CVT transmission for pairing, with a price range of 93900 to 150900 yuan. It is a masterpiece of Chery's return to the brand