The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The QQ3 pure electric vehicle is a small pure electric sedan developed on the Chery S11 vehicle platform. The vehicle is equipped with a 60V 6KW electric drive system and a 150Ah high-performance power battery The entire vehicle manufacturing process of QQ3 pure electric vehicle is very mature, following the traditional automobile manufacturing process platform, and there is no significant difference in appearance from the traditional QQ3. The word "EV" at the tail can distinguish it as a zero emission, pollution-free green transportation vehicle. The internal space and other aspects are also similar to the traditional QQ3. According to technicians, the motor tachometer has replaced the traditional engine tachometer, making it easy to monitor the operating speed of the motor in real time; The battery level is converted into voltage and displayed on the traditional QQ3 car fuel gauge. The ideal vehicle speed and battery level are marked in green to remind drivers to operate the vehicle better and extend its lifespan
Copyright © 2021.Company name All rights reserved.