tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Chery QQ3EV New Energy introduce

The QQ3 pure electric vehicle is a small pure electric sedan developed on the Chery S11 vehicle platform. The vehicle is equipped with a 60V 6KW electric drive system and a 150Ah high-performance power battery The entire vehicle manufacturing process of QQ3 pure electric vehicle is very mature, following the traditional automobile manufacturing process platform, and there is no significant difference in appearance from the traditional QQ3. The word "EV" at the tail can distinguish it as a zero emission, pollution-free green transportation vehicle. The internal space and other aspects are also similar to the traditional QQ3. According to technicians, the motor tachometer has replaced the traditional engine tachometer, making it easy to monitor the operating speed of the motor in real time; The battery level is converted into voltage and displayed on the traditional QQ3 car fuel gauge. The ideal vehicle speed and battery level are marked in green to remind drivers to operate the vehicle better and extend its lifespan