The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The 18 Porsche Panamera new energy models have a similar exterior design to the Panamera. The front of the car is designed in a family style with rounded lines, but the rear of the car is still more advanced in the new energy version, which looks more coordinated. The body size is 5049 * 1937 * 1423mm, and the wheelbase is 2950mm. The slender body looks very elegant from the side, and the hatchback style is also unique. The double spoke wheels are a bit thicker than the Panamera, This can also be used to distinguish between the two
Copyright © 2021.Company name All rights reserved.