Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Besturn B70 introduce

The Pentium B70 has a small change. It is a highly anticipated independent product of FAW sedan. Although it heavily draws on the technology of the joint venture Mazda 6 and is produced in the same line as Mazda 6, it is a true independent brand product. The Pentium B70 has undergone 3 million kilometers of road testing and has undergone 518 inspections The launch of this car not only demonstrates the strong technical strength of FAW Pentium, but also reflects its development strategy of focusing on green and environmental protection, as well as independent technological innovation. From previous test cars, the new generation B70 adopts the Pentium family's hexagonal grille on the front face, and the headlights also adopt a wing shaped contour design. From the appearance of the B90 at the Beijing Auto Show, The replacement B70 may adopt the family front face design of the new generation Pentium family represented by the B90