Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Besturn B70 introduce

The Pentium B70 has a small change. It is a highly anticipated independent product of FAW sedan. Although it heavily draws on the technology of the joint venture Mazda 6 and is produced in the same line as Mazda 6, it is a true independent brand product. The Pentium B70 has undergone 3 million kilometers of road testing and has undergone 518 inspections The launch of this car not only demonstrates the strong technical strength of FAW Pentium, but also reflects its development strategy of focusing on green and environmental protection, as well as independent technological innovation. From previous test cars, the new generation B70 adopts the Pentium family's hexagonal grille on the front face, and the headlights also adopt a wing shaped contour design. From the appearance of the B90 at the Beijing Auto Show, The replacement B70 may adopt the family front face design of the new generation Pentium family represented by the B90