Transmission valve body: Introduction to the transmission valve body: 1. The transmission valve body can be used for shifting between high and low gears. When the vehicle speed reaches a certain gear, hydraulic oil pushes the valve body to automatically shift the gear to that gear. The automatic transmission can automatically change the transmission ratio according to the engine load and speed, so that the car can achieve good power and fuel economy, and reduce engine emissions pollution. 2. The automatic transmission is easy to operate, When vehicles are congested, it can greatly improve the safety and reliability of vehicle operation. Electronic controlled automatic transmissions are usually composed of five parts: hydraulic torque converter, planetary gear transmission system, shift actuator, hydraulic control system, and electronic control system)
The function of the gearbox valve body is to drive the gearbox to shift high and low. The gearbox valve body controls various shifting mechanisms by converting the oil circuits inside the valve body. Of course, there may be damage to components on the vehicle, such as the gearbox valve body. The reasons for damage may include the following: 1. Insufficient internal pressure caused by structural damage or insufficient sealing inside the valve body, resulting in difficulty in separating or combining shifting actions; 2. The electromagnetic valve or mechanical part inside the valve body is damaged, causing the original function to not function properly; 3. If the oil in the valve body is used for too long and there are too many impurities in the oil, it will cause the valve body to operate slowly. If the time is too long, it will exacerbate the wear of the valve body. Symptoms of a damaged transmission valve body: 1. Impact sensation during upshifting and downshifting, and obvious jerking during shifting; 2. There is a strong jerking sensation when shifting gears, and the shifting motion is not smooth, etc; 3. The gearbox makes abnormal noises while driving; 4. The instrument panel displays a transmission fault light
The Shenbao D20 is a car produced by Beijing Automotive Company, with front wheel drive as the driving mode. As an A0 level performance sedan also built with the SAAB quality management system, the Beiqi Shenbao D20 fully showcases the brand gene of "performance persistence" with its four major highlights of international quality, technological intelligence, fashionable design, and thoughtful service, And a comprehensive quality upgrade has been carried out on the basis of the original Beijing Automotive E-series. This car will win the favor of the post-80s consumer group who pursue fashion and pay attention to quality, and will also become a new quality benchmark in the A0 level automotive market in China
Copyright © 2021.Company name All rights reserved.