Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Shenbao D20 is a car produced by Beijing Automotive Company, with front wheel drive as the driving mode. As an A0 level performance sedan also built with the SAAB quality management system, the Beiqi Shenbao D20 fully showcases the brand gene of "performance persistence" with its four major highlights of international quality, technological intelligence, fashionable design, and thoughtful service, And a comprehensive quality upgrade has been carried out on the basis of the original Beijing Automotive E-series. This car will win the favor of the post-80s consumer group who pursue fashion and pay attention to quality, and will also become a new quality benchmark in the A0 level automotive market in China
Copyright © 2021.Company name All rights reserved.