The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
In 2017, the new compact SUV, BAIC Changhe Q7, under the BAIC Changhe brand, was officially unveiled. The new car has a rugged and square design, and is available in a 5-seater/7-seater version. It is reported that the new car will be officially put into production within the year. The body side of the BAIC Changhe Q7 adopts a suspended roof, and the A/B/C/D pillars are all painted in black, which has an excellent visual effect. The tail adopts a left and right through type tail light design, which is highly recognizable when lit. In terms of size, The new car has a length, width, and height of 4655/1855/1720mm, and a wheelbase of 2670mm. The BAIC Changhe Q7 is equipped with a large-sized LCD display screen and vertical air conditioning vents. At the same time, the new car is equipped with a leather multifunctional steering wheel, front seat ventilation/heating, reverse radar, one click start, and other configurations. In addition, the new car will offer two layout forms for consumers to choose from: 5 seats and 7 seats
Copyright © 2021.Company name All rights reserved.