transmission shaft introduce

The drive shaft is composed of a shaft tube, a telescopic sleeve, and a universal joint. The driveshaft is a circular object accessory that is connected or assembled with various accessories, and can be moved or rotated. It is generally made of light and torsion resistant alloy steel pipes. For front engine rear wheel drive vehicles, it is the shaft that transmits the rotation of the transmission to the main reducer, which can be connected by several universal joints. It is a high-speed, less supported rotating body, Therefore, its dynamic balance is crucial. Generally, the transmission shaft undergoes a dynamic balance test before leaving the factory and is adjusted on a balancing machine. The transmission shaft is an important component in the automotive transmission system that transmits power, and its function is to transmit the engine's power to the wheels together with the gearbox and drive axle, To generate driving force for automobiles. The market competition in the transmission shaft industry presents the following pattern: a few strong transmission shaft production enterprises occupy the main market for main engine accessories; Most transmission shaft production enterprises with small scale, weak technical strength, and low brand awareness mainly rely on low price advantages to occupy some of the low-end host supporting market and maintenance service market, and are in a passive position in competition. Domestic transmission shaft enterprises with strong strength are partly joint venture, cooperative, or wholly-owned transmission shaft production enterprises of well-known foreign automotive parts enterprises in China, relying on their advanced equipment, technology, and high brand awareness, Mainly supporting foreign or joint venture host manufacturers, occupying a dominant position in the domestic constant speed drive shaft market; The other part is domestic transmission shaft production enterprises with a long business history, a certain production scale, and independent brands. Due to their good product quality and certain price advantages, they have long-term cooperative relationships with major domestic host manufacturers and have a clear advantageous position in the domestic non constant speed transmission shaft host matching market)

Installation method of universal joint for transmission shaft

The installation method for the universal joint of the transmission shaft is as follows: 1. Lift the front end of the vehicle with a jack. Place the jack at the front end of the frame to ensure stability. Drain the transmission fluid to prevent leakage. Insert the transmission filler plug; 2. Prepare a container for fluid and disconnect the drain plug of the transmission. Ensure the integrity of the drive shaft component by creating reference marks. Remove the installation clip or bolt to drive the drive shaft; 3. Remove the drive shaft from the transmission by removing the shackles. Secure the bearing cover with adhesive tape to prevent collision of the needle roller bearing. Stabilize it on the secondary drive shaft. Remove the magnetic tape and remove the bearing from the yoke by removing the retaining ring; 4. Use sockets of different sizes and levers provided by pliers to keep the bearing cover away from the yoke. Use pliers to push the cover onto the assembly. Flip the drive shaft around the pliers and repeat the previous process on the other end; 5. Remove all dirt and debris from the universal joints of the two yokes and the drive shaft assembly, ensuring complete cleanliness. Apply a small amount of lubricating grease to the replacement cover. Insert the bearing cover partially into the yoke and replace the bearing cover; 6. Install the universal joint into the cover. Partially insert the opposing cap. Arrange the universal joints in a row and use a press to push the cover to the appropriate position. Insert the retaining ring and position the drive shaft. Confirm that the yoke is correctly aligned with the drive shaft

Beiqi Daoda V8 introduce

This new car from BAIC has a fairly good body size, with a length of 4900mm, a width of 1830mm, and a height of 1890mm. It has a wheelbase length of 2900mm, which is better than that of the Alphard. The overall quality of the vehicle is also excellent. Although the front face is almost the same as the old Alphard, it also has its own exciting elements. On the basis of the spindle type air intake, the car is also decorated with the same dot matrix chrome plating as the Alphard. There is no significant difference in brightness and other configurations of the LED circular headlights, Its side adopts a manual sliding door with sliding rails, and the rear end is identical to the old version of the Alphard except for the logo