Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

BAIC Huansu H3 introduce

The BAIC Phantom H3 is an MPV car launched by BAIC Yinxiang. With a length of 4660mm, width of 1770mm, height of 1780mm, and an ultra long wheelbase of 2800mm, it is the biggest highlight of the BAIC Phantom H3 product. In addition to ample internal space, the 7-seater design of the BAIC Phantom H3 also provides 20 seat combinations and 19 interior storage areas. After expansion, the luggage compartment can reach a super capacity of 3573L, meeting the daily passenger and cargo carrying needs of ordinary family users