tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

BAIC Huansu H3 introduce

The BAIC Phantom H3 is an MPV car launched by BAIC Yinxiang. With a length of 4660mm, width of 1770mm, height of 1780mm, and an ultra long wheelbase of 2800mm, it is the biggest highlight of the BAIC Phantom H3 product. In addition to ample internal space, the 7-seater design of the BAIC Phantom H3 also provides 20 seat combinations and 19 interior storage areas. After expansion, the luggage compartment can reach a super capacity of 3573L, meeting the daily passenger and cargo carrying needs of ordinary family users