LUK introduce

The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)

Installation method of clutch three piece set

This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type

BAIC Weiwang 307 introduce

The Weiwang 307 is an extended version of the Weiwang 306, with a length of 4495mm and a wheelbase of 2920mm. As a result, the Weiwang 307 has a larger rear space. The front face of the Weiwang 307 has a more overall feel, and the two mesh grilles make the vehicle more refined and upgraded to a certain extent. The red BAIC logo is also quite festive. It has an additional window on the side that can be opened, which can be used by rear passengers for ventilation and breathability, The interior environment of the Weiwang 307 will become better. Of course, the interior design of the Weiwang 307 is mainly practical, with a simple and simple console design that has obvious Japanese micro car characteristics. The speedometer is a traditional scale, and information such as the tachometer, water temperature gauge, oil gauge, and time are displayed through the digital instrument panel on the right. The Weiwang 307 can be equipped with four rows of seats, and the maximum number of passengers in the car can be increased to 9. If only two rows of seats are selected, So most car owners plan to use this car as a truck. After removing the rear seats, the rear compartment forms a complete loading space. In addition, there are many small storage spaces available on the Weiwang 307, which is very convenient. In terms of power, the Weiwang 307 currently only has a 1.2L four cylinder engine, with a maximum power of 63.5kW and a maximum torque of 108Nm. It is equipped with a 5-speed manual transmission and adopts rear wheel drive. The low-end models do not have steering assistance, making it difficult to turn the wheels in place