Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

BAIC Weiwang 307 introduce

The Weiwang 307 is an extended version of the Weiwang 306, with a length of 4495mm and a wheelbase of 2920mm. As a result, the Weiwang 307 has a larger rear space. The front face of the Weiwang 307 has a more overall feel, and the two mesh grilles make the vehicle more refined and upgraded to a certain extent. The red BAIC logo is also quite festive. It has an additional window on the side that can be opened, which can be used by rear passengers for ventilation and breathability, The interior environment of the Weiwang 307 will become better. Of course, the interior design of the Weiwang 307 is mainly practical, with a simple and simple console design that has obvious Japanese micro car characteristics. The speedometer is a traditional scale, and information such as the tachometer, water temperature gauge, oil gauge, and time are displayed through the digital instrument panel on the right. The Weiwang 307 can be equipped with four rows of seats, and the maximum number of passengers in the car can be increased to 9. If only two rows of seats are selected, So most car owners plan to use this car as a truck. After removing the rear seats, the rear compartment forms a complete loading space. In addition, there are many small storage spaces available on the Weiwang 307, which is very convenient. In terms of power, the Weiwang 307 currently only has a 1.2L four cylinder engine, with a maximum power of 63.5kW and a maximum torque of 108Nm. It is equipped with a 5-speed manual transmission and adopts rear wheel drive. The low-end models do not have steering assistance, making it difficult to turn the wheels in place