Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Honda CR-Z introduce

The interior design of the CR-Z continues the high-tech and dynamic design style, with the most prominent feature being a very futuristic instrument panel. The CR-Z's gauge cluster can emit three different colors of light according to different driving modes. The interior design of this CR-Z is very light and spacious, using many mesh like materials The front face of the CR-Z is prominent and full, with a sporty and conceptual feel, which is somewhat similar to the Audi R8. The tail lights are sharp triangles, with three rows of LED lights distributed parallel, showcasing a sporty style. The rear bumper of the Honda CR-Z is very wide, integrated with the rear fender. Below the rear bumper is a black diffuser decorative strip, which is also a standard sports car configuration