electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

BAIC New Energy EU introduce

The BAIC EU series is a new energy vehicle under the BAIC Group, which adopts the design of the Senbao D50 and adds blue decorative strips to the front grille and tail emblem for decoration. The BAIC New Energy EU260 continues to use the design of the Senbao D50 in terms of appearance and adds blue decorative strips to the front grille and tail emblem for decoration. In addition, the tail height of the EU260 has been increased by 29mm and the exhaust pipe has been removed. In terms of power, The EU260 is equipped with an electric motor with a maximum power of 100kW, peak torque of 260Nm, and a maximum speed of 140km/h. Official data shows that the vehicle's range can exceed 260km, and can reach 350km under constant speed driving conditions