Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The BAIC EU series is a new energy vehicle under the BAIC Group, which adopts the design of the Senbao D50 and adds blue decorative strips to the front grille and tail emblem for decoration. The BAIC New Energy EU260 continues to use the design of the Senbao D50 in terms of appearance and adds blue decorative strips to the front grille and tail emblem for decoration. In addition, the tail height of the EU260 has been increased by 29mm and the exhaust pipe has been removed. In terms of power, The EU260 is equipped with an electric motor with a maximum power of 100kW, peak torque of 260Nm, and a maximum speed of 140km/h. Official data shows that the vehicle's range can exceed 260km, and can reach 350km under constant speed driving conditions
Copyright © 2021.Company name All rights reserved.