The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
As the first model under the new brand, the BEIJING EU7 not only failed to bring consumers enough "eye-catching" product power, but also had no advantage compared to its own "younger brother" EU5 The two cars have similar price points, but their model positioning is different The EU7 is positioned as a mid size electric vehicle, while the EU5 is positioned as a compact electric vehicle. While the two have a high degree of price overlap, the higher-level EU7 is inferior to the lower level EU5 in terms of configuration. Therefore, if BAIC replaces the EU5 with the new label of BEIJING, it can better shoulder its brand's upward responsibility
Copyright © 2021.Company name All rights reserved.