Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
As the first model under the new brand, the BEIJING EU7 not only failed to bring consumers enough "eye-catching" product power, but also had no advantage compared to its own "younger brother" EU5 The two cars have similar price points, but their model positioning is different The EU7 is positioned as a mid size electric vehicle, while the EU5 is positioned as a compact electric vehicle. While the two have a high degree of price overlap, the higher-level EU7 is inferior to the lower level EU5 in terms of configuration. Therefore, if BAIC replaces the EU5 with the new label of BEIJING, it can better shoulder its brand's upward responsibility
Copyright © 2021.Company name All rights reserved.