The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The BAIC ES210 series has made a name for itself, designed by Ferrari designer Fiolavanti. Underneath its exquisite appearance, it is the latest pure electric vehicle produced by BAIC Motor Corporation with outstanding performance. It was officially designated as the only pure electric sedan at the 2014 APEC Conference and a designated work vehicle for the 2014 Beijing International Formula Electric Championship, The 2014 First Qinghai Lake (International) Electric Vehicle Challenge Racer Recommendation Award, Best Technology Design Award, Best Silence Effect Award, and Best Handling Performance Award
Copyright © 2021.Company name All rights reserved.