transmission shaft introduce

The drive shaft is composed of a shaft tube, a telescopic sleeve, and a universal joint. The driveshaft is a circular object accessory that is connected or assembled with various accessories, and can be moved or rotated. It is generally made of light and torsion resistant alloy steel pipes. For front engine rear wheel drive vehicles, it is the shaft that transmits the rotation of the transmission to the main reducer, which can be connected by several universal joints. It is a high-speed, less supported rotating body, Therefore, its dynamic balance is crucial. Generally, the transmission shaft undergoes a dynamic balance test before leaving the factory and is adjusted on a balancing machine. The transmission shaft is an important component in the automotive transmission system that transmits power, and its function is to transmit the engine's power to the wheels together with the gearbox and drive axle, To generate driving force for automobiles. The market competition in the transmission shaft industry presents the following pattern: a few strong transmission shaft production enterprises occupy the main market for main engine accessories; Most transmission shaft production enterprises with small scale, weak technical strength, and low brand awareness mainly rely on low price advantages to occupy some of the low-end host supporting market and maintenance service market, and are in a passive position in competition. Domestic transmission shaft enterprises with strong strength are partly joint venture, cooperative, or wholly-owned transmission shaft production enterprises of well-known foreign automotive parts enterprises in China, relying on their advanced equipment, technology, and high brand awareness, Mainly supporting foreign or joint venture host manufacturers, occupying a dominant position in the domestic constant speed drive shaft market; The other part is domestic transmission shaft production enterprises with a long business history, a certain production scale, and independent brands. Due to their good product quality and certain price advantages, they have long-term cooperative relationships with major domestic host manufacturers and have a clear advantageous position in the domestic non constant speed transmission shaft host matching market)

Installation method of universal joint for transmission shaft

The installation method for the universal joint of the transmission shaft is as follows: 1. Lift the front end of the vehicle with a jack. Place the jack at the front end of the frame to ensure stability. Drain the transmission fluid to prevent leakage. Insert the transmission filler plug; 2. Prepare a container for fluid and disconnect the drain plug of the transmission. Ensure the integrity of the drive shaft component by creating reference marks. Remove the installation clip or bolt to drive the drive shaft; 3. Remove the drive shaft from the transmission by removing the shackles. Secure the bearing cover with adhesive tape to prevent collision of the needle roller bearing. Stabilize it on the secondary drive shaft. Remove the magnetic tape and remove the bearing from the yoke by removing the retaining ring; 4. Use sockets of different sizes and levers provided by pliers to keep the bearing cover away from the yoke. Use pliers to push the cover onto the assembly. Flip the drive shaft around the pliers and repeat the previous process on the other end; 5. Remove all dirt and debris from the universal joints of the two yokes and the drive shaft assembly, ensuring complete cleanliness. Apply a small amount of lubricating grease to the replacement cover. Insert the bearing cover partially into the yoke and replace the bearing cover; 6. Install the universal joint into the cover. Partially insert the opposing cap. Arrange the universal joints in a row and use a press to push the cover to the appropriate position. Insert the retaining ring and position the drive shaft. Confirm that the yoke is correctly aligned with the drive shaft

Volvo XC40 introduce

The Volvo XC40 is the first model produced by Volvo Cars based on advanced CMA basic module architecture. It is the first compact SUV in Volvo Cars. At the 2018 Beijing International Auto Show, Volvo Cars unveiled three new SUV product matrices for the world: the XC90. The all-new XC60 and XC40. The XC40 T5 plug-in hybrid version is the world's first public appearance. The Volvo XC40 has comprehensively improved in design, technology, and driving control, Its appearance adopts the latest design language, with comprehensive adjustments to the height and width of the body. The interior space incorporates numerous humanized designs and is equipped with the Pilot Assist system, the new generation City Safety urban safety system Sensus intelligent in car interaction system and other security, connectivity, and information entertainment technologies. The Volvo XC40 model was awarded the 2018 European Car of the Year title. On April 16, 2019, the all-new Volvo XC40 was pre-sale at the Shanghai Auto Show