The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Before June 2010, the newly appointed Deputy General Manager of FAW, Wang Fachang, who was in charge of sales, revealed on various occasions that the Besturn B30 would officially be taken off the production line in the second half of 2010, and the B90 project, which was positioned as a higher level, was also being orderly promoted. However, the project of this entry-level A-class car with the model code B30 for FAW Besturn has been postponed to 2011 within FAW sedans, which means that there will be no new cars launched by FAW Besturn in 2010, As for the reason why the B30 project has been postponed to next year, FAW sedan personnel did not disclose specifically
Copyright © 2021.Company name All rights reserved.