On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Roewe RX5, an internet SUV launched by SAIC Roewe in 2016, adopts "Blue Core" high-efficiency power technology and is equipped with two 2.0T and 1.5T inline direct injection turbocharged engines. Specifically, the 2.0T engine has a maximum power of 220 horsepower, a peak torque of 350 Nm, and a minimum combined fuel consumption of 8.1L per 100 kilometers; The 1.5T engine has a maximum power of 169 horsepower, peak torque of 250 Newton meters, and a comprehensive fuel consumption of only 6.8L per 100 kilometers. In addition, the Roewe RX5 adopts Porsche chassis tuning, GKN intelligent real-time four-wheel drive system, fully independent suspension system, and all four high-speed CANBUS system bus, which are homologous to Land Rover, to comprehensively improve driving and riding quality
Copyright © 2021.Company name All rights reserved.