Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Fengshen L60 is a product jointly developed by Dongfeng and PSA Group. It is based on the PSA No. 2 platform and has a wheelbase of 2710mm. In terms of appearance, the Fengshen L60 adopts a double banner front grille, with wedge-shaped headlights and front grille integrated. The rear design of the new car looks average, and in terms of body size, the length, width, and height of the Fengshen L60 are 4712mm/1820mm/1540mm, respectively, The wheelbase is 2710mm, which is the same as the current Dongfeng Peugeot 408. In terms of power, the new car will be equipped with a 1.6L or 1.8L engine, with a maximum power of 117 horsepower for the 1.6L engine and 139 horsepower for the 1.8L engine
Copyright © 2021.Company name All rights reserved.