The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
At the Beijing Auto Show that opened on April 25, 2016, the Dongfeng Fengshen AX5 was officially released. The new car is based on the DF1 platform of Dongfeng Motors and is positioned as a compact SUV. It is reported that the Dongfeng Fengshen AX5 is expected to be officially launched and sold within this year. The Dongfeng Fengshen AX5 adopts the design concept of "flow and dynamics" of Dongfeng Fengshen, and the overall design style is very youthful. In terms of power, the Dongfeng Fengshen AX5 is expected to be equipped with a self-developed 1.4T turbocharged engine, which is codenamed DFMA14TD, And it has technologies such as direct injection in the cylinder and variable valve timing. In terms of transmission system, it is matched with a 5-speed manual or 6-speed automatic transmission
Copyright © 2021.Company name All rights reserved.