Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

C4 Sega introduce

On September 2, 2015, Dongfeng Citroen unveiled its mid size C4 Sega in Chengdu with the theme of "the highest level of efficiency and beauty" The C4 Sega is equipped with a dual T combination of 1.2THP.1.6THP, and the turbo will intervene at 1000 rpm. The driver can feel the power output of T power intervention by pressing the accelerator. At the same time, the vehicle is equipped with an STT engine start stop system to minimize fuel consumption, with a comprehensive fuel consumption of only 5.0 liters per 100 kilometers. The car's configuration has been upgraded again, and the entire series is equipped with a 7-inch color intelligent multimedia touch screen system as standard, as well as a one key start intelligent keyless entry system, And the Citroen Connect in car connectivity system integrates intelligent navigation, entertainment information, car security services, remote vehicle diagnosis, and in car communication. It also comes with mainstream configurations such as one click start and blind spot monitoring